Info: 'This is intended for PS File generation only. Checking it will prevent the driver from seeing any AppleTalk printer.'
3:
Bounds: x1=7, y1=94, x2=426, y2=161
Type: -120
Info: 'This change will only be recognized by the Chooser if its cache is flushed by removing all LaserWriter 8.x drivers from the System or Extensions folder and then using the Chooser. Don't forget to put the drivers back.'
4:
Bounds: x1=6, y1=7, x2=38, y2=39
Type: -96
Info: ' '
DITL_132.txt
Items: (6 entries)
0:
Bounds: x1=311, y1=207, x2=369, y2=227
Type: 4
Info: 'OK'
1:
Bounds: x1=126, y1=4, x2=333, y2=51
Type: -64
Info: ' Å'
2:
Bounds: x1=21, y1=77, x2=437, y2=192
Type: -64
Info: ' Ä'
3:
Bounds: x1=54, y1=14, x2=86, y2=46
Type: -96
Info: ' Ä'
4:
Bounds: x1=373, y1=14, x2=405, y2=46
Type: -96
Info: ' Ä'
5:
Bounds: x1=424, y1=2, x2=458, y2=18
Type: -120
Info: '^3'
DITL_133.txt
Items: (3 entries)
0:
Bounds: x1=219, y1=77, x2=277, y2=97
Type: 4
Info: 'OK'
1:
Bounds: x1=12, y1=8, x2=44, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=55, y1=7, x2=280, y2=70
Type: -120
Info: 'Please use the Chooser to select the driver «^0» before trying to modify its defaults.'
DITL_134.txt
Items: (3 entries)
0:
Bounds: x1=234, y1=81, x2=292, y2=101
Type: 4
Info: 'OK'
1:
Bounds: x1=12, y1=13, x2=44, y2=45
Type: -96
Info: ' '
2:
Bounds: x1=70, y1=11, x2=295, y2=74
Type: -120
Info: '«^0» is a driver for QuickDraw GX and is not supported by this version of Printer Defaults.'
DITL_135.txt
Items: (3 entries)
0:
Bounds: x1=272, y1=52, x2=330, y2=72
Type: 4
Info: 'OK'
1:
Bounds: x1=12, y1=10, x2=44, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=52, y1=10, x2=334, y2=44
Type: -120
Info: 'Error ^0 preferences.ResError = ^1.'
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=219, y1=77, x2=277, y2=97
Type: 4
Info: 'OK'
1:
Bounds: x1=12, y1=8, x2=44, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=55, y1=7, x2=280, y2=70
Type: -120
Info: 'The Print dialog cannot be displayed with this driver «^0».'
DITL_200.txt
Items: (11 entries)
0:
Bounds: x1=227, y1=210, x2=285, y2=230
Type: 4
Info: 'Done'
1:
Bounds: x1=153, y1=210, x2=211, y2=230
Type: 4
Info: 'Cancel'
2:
Bounds: x1=239, y1=210, x2=274, y2=230
Type: -128
Info: ''
3:
Bounds: x1=8, y1=210, x2=137, y2=230
Type: 4
Info: 'Save as defaults'
4:
Bounds: x1=102, y1=99, x2=356, y2=117
Type: 5
Info: 'Show "Print…" dialog at end'
5:
Bounds: x1=126, y1=5, x2=333, y2=52
Type: -64
Info: ' Å'
6:
Bounds: x1=52, y1=13, x2=84, y2=45
Type: -96
Info: ' Ä'
7:
Bounds: x1=380, y1=14, x2=412, y2=46
Type: -96
Info: ' Å'
8:
Bounds: x1=424, y1=2, x2=458, y2=18
Type: -120
Info: '^3'
9:
Bounds: x1=102, y1=125, x2=356, y2=143
Type: 5
Info: 'Show extra options when available'
10:
Bounds: x1=102, y1=151, x2=356, y2=169
Type: 5
Info: 'LW 8 Nup menu fax compatible'
DITL_201.txt
Items: (6 entries)
0:
Bounds: x1=342, y1=15, x2=420, y2=35
Type: 4
Info: 'Save'
1:
Bounds: x1=342, y1=46, x2=420, y2=66
Type: 4
Info: 'Don't Save'
2:
Bounds: x1=358, y1=15, x2=402, y2=35
Type: -128
Info: ''
3:
Bounds: x1=342, y1=72, x2=420, y2=92
Type: 4
Info: 'Help'
4:
Bounds: x1=10, y1=22, x2=328, y2=38
Type: -120
Info: 'Additional option for «^0» '
5:
Bounds: x1=10, y1=54, x2=203, y2=72
Type: 5
Info: 'Display a ‘Disk File’ button'
DITL_202.txt
Items: (11 entries)
0:
Bounds: x1=335, y1=10, x2=419, y2=30
Type: 4
Info: 'Save'
1:
Bounds: x1=335, y1=40, x2=419, y2=60
Type: 4
Info: 'Don't Save'
2:
Bounds: x1=349, y1=10, x2=402, y2=30
Type: -128
Info: ''
3:
Bounds: x1=335, y1=64, x2=419, y2=84
Type: 4
Info: 'Help'
4:
Bounds: x1=9, y1=11, x2=326, y2=27
Type: -120
Info: 'Additional options for «^0»'
5:
Bounds: x1=9, y1=41, x2=314, y2=59
Type: 5
Info: 'Enable n-up pages menu in Print dialog'
6:
Bounds: x1=9, y1=61, x2=314, y2=79
Type: 5
Info: '‘Setup’ button in Chooser always active'
7:
Bounds: x1=9, y1=81, x2=314, y2=99
Type: 5
Info: 'AppleTalk not required'
8:
Bounds: x1=9, y1=101, x2=314, y2=119
Type: 5
Info: 'Lock number of copies to 1'
9:
Bounds: x1=8, y1=131, x2=313, y2=149
Type: 5
Info: 'Don't frame n-up pages'
10:
Bounds: x1=8, y1=151, x2=313, y2=169
Type: 5
Info: 'Display PPD parsing error alert'
DITL_203.txt
Items: (17 entries)
0:
Bounds: x1=389, y1=13, x2=473, y2=33
Type: 4
Info: 'Save'
1:
Bounds: x1=389, y1=45, x2=473, y2=65
Type: 4
Info: 'Don't Save'
2:
Bounds: x1=403, y1=13, x2=456, y2=33
Type: -128
Info: ''
3:
Bounds: x1=389, y1=73, x2=473, y2=93
Type: 4
Info: 'Help'
4:
Bounds: x1=8, y1=9, x2=333, y2=25
Type: -120
Info: 'Additional options for «^0»'
5:
Bounds: x1=8, y1=35, x2=333, y2=53
Type: 5
Info: 'Enable n-up pages menu in Print dialog'
6:
Bounds: x1=8, y1=54, x2=333, y2=72
Type: 5
Info: '‘Setup’ button in Chooser always active'
7:
Bounds: x1=8, y1=73, x2=333, y2=91
Type: 5
Info: 'AppleTalk not required'
8:
Bounds: x1=8, y1=92, x2=333, y2=110
Type: 5
Info: 'Lock number of copies to 1'
9:
Bounds: x1=8, y1=120, x2=244, y2=138
Type: 5
Info: 'Reserved-1'
10:
Bounds: x1=8, y1=139, x2=244, y2=157
Type: 5
Info: 'Reserved-2'
11:
Bounds: x1=8, y1=158, x2=244, y2=176
Type: 5
Info: 'Reserved-3'
12:
Bounds: x1=8, y1=177, x2=244, y2=195
Type: 5
Info: 'Reserved-4'
13:
Bounds: x1=248, y1=120, x2=484, y2=138
Type: 5
Info: 'Reserved-5'
14:
Bounds: x1=248, y1=139, x2=484, y2=157
Type: 5
Info: 'Reserved-6'
15:
Bounds: x1=248, y1=158, x2=484, y2=176
Type: 5
Info: 'Reserved-7'
16:
Bounds: x1=248, y1=177, x2=484, y2=195
Type: 5
Info: 'Reserved-8'
DITL_204.txt
Items: (10 entries)
0:
Bounds: x1=381, y1=210, x2=450, y2=230
Type: 4
Info: 'Continue'
1:
Bounds: x1=124, y1=210, x2=193, y2=230
Type: 4
Info: 'Quit'
2:
Bounds: x1=396, y1=210, x2=440, y2=230
Type: -128
Info: ''
3:
Bounds: x1=295, y1=210, x2=364, y2=230
Type: 4
Info: 'Credits'
4:
Bounds: x1=19, y1=55, x2=438, y2=203
Type: -64
Info: ' Ç'
5:
Bounds: x1=126, y1=5, x2=333, y2=52
Type: -64
Info: ' Å'
6:
Bounds: x1=53, y1=9, x2=85, y2=41
Type: -96
Info: ' Ä'
7:
Bounds: x1=377, y1=9, x2=409, y2=41
Type: -96
Info: ' Ä'
8:
Bounds: x1=424, y1=2, x2=458, y2=18
Type: -120
Info: '^3'
9:
Bounds: x1=209, y1=210, x2=278, y2=230
Type: 4
Info: 'Options'
DITL_205.txt
Items: (10 entries)
0:
Bounds: x1=381, y1=210, x2=450, y2=230
Type: 4
Info: 'Continue'
1:
Bounds: x1=126, y1=210, x2=195, y2=230
Type: 4
Info: 'Quit'
2:
Bounds: x1=396, y1=210, x2=440, y2=230
Type: -128
Info: ''
3:
Bounds: x1=295, y1=210, x2=364, y2=230
Type: 4
Info: 'Credits'
4:
Bounds: x1=19, y1=55, x2=438, y2=203
Type: -64
Info: ' É'
5:
Bounds: x1=126, y1=4, x2=333, y2=51
Type: -64
Info: ' Å'
6:
Bounds: x1=53, y1=9, x2=85, y2=41
Type: -96
Info: ' Ä'
7:
Bounds: x1=377, y1=9, x2=409, y2=41
Type: -96
Info: ' Ä'
8:
Bounds: x1=423, y1=4, x2=457, y2=20
Type: -120
Info: '^3'
9:
Bounds: x1=210, y1=210, x2=279, y2=230
Type: 4
Info: 'Options'
DITL_206.txt
Items: (6 entries)
0:
Bounds: x1=342, y1=15, x2=420, y2=35
Type: 4
Info: 'Save'
1:
Bounds: x1=342, y1=46, x2=420, y2=66
Type: 4
Info: 'Don't Save'
2:
Bounds: x1=358, y1=15, x2=402, y2=35
Type: -128
Info: ''
3:
Bounds: x1=342, y1=72, x2=420, y2=92
Type: 4
Info: 'Help'
4:
Bounds: x1=10, y1=22, x2=328, y2=38
Type: -120
Info: 'Additional option for «^0» '
5:
Bounds: x1=10, y1=54, x2=303, y2=72
Type: 5
Info: '‘Setup’ button visible in Chooser'
DITL_1001.txt
Items: (6 entries)
0:
Bounds: x1=356, y1=104, x2=414, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=13, y1=51, x2=419, y2=99
Type: -120
Info: 'This option will place a checkbox in the “Print” dialog of «^0» which allows the PostScript™ output to be sent to a file instead of the printer.'
2:
Bounds: x1=113, y1=2, x2=320, y2=49
Type: -64
Info: ' Å'
3:
Bounds: x1=46, y1=10, x2=78, y2=42
Type: -96
Info: ' Ä'
4:
Bounds: x1=356, y1=10, x2=388, y2=42
Type: -96
Info: ' Ä'
5:
Bounds: x1=399, y1=2, x2=433, y2=18
Type: -120
Info: '^3'
DITL_1002.txt
Items: (6 entries)
0:
Bounds: x1=353, y1=150, x2=411, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=14, y1=74, x2=418, y2=128
Type: -120
Info: '«^0» has some additional options in the “Print” and Chooser dialogs which cannot be accessed through Page Setup. Use this dialog to turn these on or off.'
2:
Bounds: x1=113, y1=6, x2=320, y2=53
Type: -64
Info: ' Å'
3:
Bounds: x1=44, y1=15, x2=76, y2=47
Type: -96
Info: ' Ä'
4:
Bounds: x1=354, y1=15, x2=386, y2=47
Type: -96
Info: ' Ä'
5:
Bounds: x1=399, y1=2, x2=433, y2=18
Type: -120
Info: '^3'
DITL_1003.txt
Items: (7 entries)
0:
Bounds: x1=389, y1=170, x2=447, y2=190
Type: 4
Info: 'OK'
1:
Bounds: x1=40, y1=63, x2=450, y2=113
Type: -120
Info: '«^0» has some additional options for the “Print” and Chooser dialogs which cannot be accessed through Page Setup. This dialog allows them to be modified.'
2:
Bounds: x1=142, y1=5, x2=349, y2=52
Type: -64
Info: ' Å'
3:
Bounds: x1=65, y1=14, x2=97, y2=46
Type: -96
Info: ' Ä'
4:
Bounds: x1=395, y1=14, x2=427, y2=46
Type: -96
Info: ' Ä'
5:
Bounds: x1=40, y1=125, x2=450, y2=158
Type: -120
Info: 'Of the last 8 the ability to turn off framing of n-up pages is the most useful. '
6:
Bounds: x1=448, y1=5, x2=482, y2=21
Type: -120
Info: '^3'
DITL_1004.txt
Items: (6 entries)
0:
Bounds: x1=356, y1=104, x2=414, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=14, y1=51, x2=419, y2=98
Type: -120
Info: 'This option hides the ‘Setup…’ button in the Chooser when «^0» is selected for compatibility with the rest of the LaserWriter 7.x series.'